
Mapei Repair MortarNo. 46 / 53
Planitop 220 ME Technical Data Sheet (TDS)
Repair Mortar to EN 1504-3 CLASSIFIED AS R2.
Polymer modification is what separates Planitop 220 ME from the single component fairing coats: a two component mortar classified R2, applied in multiple layers up to 10 mm, so it covers both smoothing and light reprofiling. Use it for filling blowholes and surface imperfections in precast units, smoothing blemishes in concrete before coating, minor honeycombing and irregular cement render that still has sound strength.
- Smoothing and levelling concrete surface imperfections
- Blowhole filling in cast and precast concrete
- Reprofiling in multiple layers up to 10 mm
- Filling minor honeycombing
- Smoothing irregular cement based renders
Build a list across products and send it once, or ask about Planitop 220 ME on WhatsApp now.
- Class
- EN 1504-3 CLASSIFIED AS R2
- Consumption
- 1.6 kg/m² per mm
- Pack we stock
- 17.5 kg
- Colour
- grey white
Mapei document 01228 · revision 6-2020
About Planitop 220 ME
The extra build means a patched surface can be brought back to line without moving up to a structural repair mortar. Components mix at 1 part A to 0.3 parts B, with a pot life of about an hour and a working range of 5 to 40 degrees. Average consumption is 1.6 kg per square metre per millimetre. Mix only what the gang can place inside the pot life, which shortens as the day heats up.
Documentation
Related documentation
Technical data sheet
Revision 6-2020 · 2.3 MB · PDF
Planitop 220 ME as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
The sheet states 0.5 to 2 mm.
As published in the data sheet
160kg
- 1.6 kg/m2 per mm
- 2 mm thick
- over 50 m2
Order 8 packs of 22.75 kg unit (A 17.5 kg bag plus B 5.25 kg drum)
Taken from the Planitop 220 ME data sheet: CONSUMPTION: the average consumption is approx. 1.6 kg/m2 per mm of thickness, depending on the surface substrate conditions. No site allowance is added unless you turn one on. Applied at a maximum thickness of 0.5 to 2 mm per layer, and up to 10 mm in multiple layers, so the default here is the maximum for one layer. The sheet also prints a yield of 14.21 litres per 22.75 kg unit, which works out at 1.60 kg/m2 per mm and agrees exactly with the consumption figure.
Application
Where it is used.
- 01Smoothing and levelling concrete surface imperfections
- 02Blowhole filling in cast and precast concrete
- 03Reprofiling in multiple layers up to 10 mm
- 04Filling minor honeycombing
- 05Smoothing irregular cement based renders
Specification
Technical data.
- EN 1504-3 CLASSIFIED AS R2
- EN 1504
| Classification | EN 1504-3, R2 |
|---|---|
| Coverage | Depending on the surface substrate conditions. The average consumption is approx. 1.6 kg/m² per mm of thickness. YIELD 14.21 liters/22.75 kg. |
| Pack size | 17.5 kg |
| Pot life | approx. 1 hour |
| Set to light foot traffic | 3 days on surfaces smoothed over using Planitop 220 ME |
| Colours | grey white |
| Mixing ratio | component A : component B = 1 : 0.3 |
| Application temperature | from +5°C to +40°C |
| Consistency | component A powder, component B liquid |
| Storage and shelf life | When stored in dry conditions in the original unopened bags, Planitop 220 ME component A has a shelf life of 12 months. |
| Density | 1200 kg/m³ |
| Dry solids | 100 % |
Typical values as Mapei prints them in the data sheet for Planitop 220 ME. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
17.5 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Mixing
component A : component B = 1 : 0.3. Mix mechanically to a uniform lump free consistency, and follow any standing time the data sheet gives before remixing. Do not add extra water to recover workability, which lowers strength.
Working time
approx. 1 hour. Mix only what can be placed inside it. UAE summer temperatures shorten every working time printed on a sheet.
Storage
When stored in dry conditions in the original unopened bags, Planitop 220 ME component A has a shelf life of 12 months. in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Planitop 220 ME, a repair mortar manufactured by Mapei, classified EN 1504-3 CLASSIFIED AS R2. Allow 1.6 kg/m2 per mm, as published by the manufacturer. Mix at component A : component B = 1 : 0.3. Supplied in 17.5 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Planitop 220 ME |
|---|---|
| Manufacturer | Mapei |
| Type | Repair Mortar |
| Classification | EN 1504-3 CLASSIFIED AS R2 |
| Consumption | 1.6 kg/m2 per mm |
| Pack size | 17.5 kg |
| Mixing ratio | component A : component B = 1 : 0.3 |
| Set time | 3 days on surfaces smoothed over using Planitop 220 ME |
| Pot life | approx. 1 hour |
| Unit of measurement | m2 |
Frequently Asked Questions
Planitop 220 ME is classified EN 1504-3 CLASSIFIED AS R2 according to EN 1504, as stated in the manufacturer's technical data sheet.
As per the TDS: Depending on the surface substrate conditions. The average consumption is approx. 1.6 kg/m² per mm of thickness. YIELD 14.21 liters/22.75 kg.
17.5 kg
You can download the official Planitop 220 ME technical data sheet as a PDF directly from this page, revision 6-2020, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Adesilex PG2
View TDS and specifications

Adesilex PG2 TG
View TDS and specifications

Adesilex PG4
CE EN 1504-4
View TDS and specifications

Dynamon MR 2100
ASTM C494, EN 934-2
View TDS and specifications

Dynamon MR 3000
ASTM C494, EN 934-2
View TDS and specifications

Dynamon SR 1200
ASTM C494, EN 934-2
View TDS and specifications
All Concrete Additives and Repair SystemsEvery Mapei product and the distributor page
On the van
Tools for this job.

Hilti
TE 500-22 Cordless Chipping Hammer
Breaking back to sound concrete and squaring the edges of the patch before anything is mixed.
View the range
Keiser
Mixing Applications
Repair mortars are mixed to a stated consistency, not to whatever looks right in the bucket.
View the range
Peygran
Cement Tools
Trowels and finishing floats to work the mortar into the prepared edges and bring it flush with the surround.
View the range
Planitop 220 ME in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Planitop 220 ME you need, or describe the job and we will work it out with you.