Planitop 400 ME repair mortar pack
Mapei's own picture. The pack we stock: 25 kg.

Mapei Repair MortarNo. 47 / 53

Planitop 400 ME Technical Data Sheet (TDS)

Repair Mortar to R3.

Planitop 400 ME is a shrinkage controlled thixotropic mortar for levelling and restoring concrete, applied by hand in a single layer at any thickness between 2 and 30 mm. That span is unusually wide and is the reason to specify it: one product covers a feathered edge and a 30 mm reprofile on vertical or horizontal surfaces without formwork.

  • Restoring balcony corners and edges damaged by rusting reinforcement
  • Repairs to beams, pillars and concrete panels
  • Precast elements damaged in transport or installation
  • Repairs to damaged concrete piping
  • Filling honeycombs, holes and cold joints in castings
  • Deep levelling of vertical and horizontal concrete
Data sheet2.1 MB

Build a list across products and send it once, or ask about Planitop 400 ME on WhatsApp now.

Class
R3
Consumption
1.8 kg/m² per mm
Pack we stock
25 kg
Colour
grey

Mapei document 01131 · revision 5-2014

About Planitop 400 ME

Typical jobs are balcony corners and edges damaged by rusting reinforcement, repairs to beams, pillars and concrete panels, precast elements knocked about in transport or installation, damaged concrete piping, and surface defects in castings such as honeycombs, holes and cold joints. Mixing takes 15 to 16 parts water to 100 parts powder, which is 3.75 to 4 litres per 25 kg bag, with about an hour of pot life and a range of 5 to 45 degrees. Consumption is 18 kg per square metre per centimetre.

Documentation

Related documentation

  • Technical data sheet

    Revision 5-2014 · 2.1 MB · PDF

    Planitop 400 ME as the manufacturer publishes it, unaltered.

    Download
  • Safety data sheet

    Needed for a method statement or a site file. Ask and we will send it.

    Request
  • Submittal pack

    Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.

    Request

Coverage calculator

How much you need.

m²
mm

The sheet states 2 to 30 mm.

As published in the data sheet

1,800kg

  • 1.8 kg/m2 per mm
  • 20 mm thick
  • over 50 m2

Order 72 packs of 25 kg bag

Send this quantity for a quote

Taken from the Planitop 400 ME data sheet: CONSUMPTION: 18 kg/m2 per cm of thickness. No site allowance is added unless you turn one on. The sheet quotes per centimetre and the rate here is that divided by ten. Applied at a variable thickness between 2 and 30 mm, up to 3 cm per layer.

Application

Where it is used.

  1. 01Restoring balcony corners and edges damaged by rusting reinforcement
  2. 02Repairs to beams, pillars and concrete panels
  3. 03Precast elements damaged in transport or installation
  4. 04Repairs to damaged concrete piping
  5. 05Filling honeycombs, holes and cold joints in castings
  6. 06Deep levelling of vertical and horizontal concrete

Specification

Technical data.

  • R3
  • EN 1504
Planitop 400 ME technical specifications from the manufacturer TDS
Coverage18 kg/m² per cm of thickness.
Pack size25 kg
Pot lifeca. 1 hour
Coloursgrey
Mixing ratio100 parts of Planitop 400 ME with 15-16 parts water (3.75-4.00 litres per 25 kg bag)
Application temperaturefrom +5°C to +45°C
Consistencypowder
Storage and shelf lifeIn original packaging and in a dry place, Planitop 400 ME can be stored for 12 months.
Ph> 1
Density2100 kg/m³

Typical values as Mapei prints them in the data sheet for Planitop 400 ME. Manufacturers revise their sheets, so ask us for the current edition before you specify.

On site

Packs, mixing and storage.

We stock

25 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.

Mixing

100 parts of Planitop 400 ME with 15-16 parts water (3.75-4.00 litres per 25 kg bag). Mix mechanically to a uniform lump free consistency, and follow any standing time the data sheet gives before remixing. Do not add extra water to recover workability, which lowers strength.

Working time

ca. 1 hour. Mix only what can be placed inside it. UAE summer temperatures shorten every working time printed on a sheet.

Storage

In original packaging and in a dry place, Planitop 400 ME can be stored for 12 months. in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.

For quantity surveyors

BOQ clause.

Supply and apply Planitop 400 ME, a repair mortar manufactured by Mapei, classified R3. Allow 1.8 kg/m2 per mm, as published by the manufacturer. Mix at 100 parts of Planitop 400 ME with 15-16 parts water (3.75-4.00 litres per 25 kg bag). Supplied in 25 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.

Schedule fields for Planitop 400 ME
ProductPlanitop 400 ME
ManufacturerMapei
TypeRepair Mortar
ClassificationR3
Consumption1.8 kg/m2 per mm
Pack size25 kg
Mixing ratio100 parts of Planitop 400 ME with 15-16 parts water (3.75-4.00 litres per 25 kg bag)
Pot lifeca. 1 hour
Unit of measurementm2

Frequently Asked Questions

Planitop 400 ME is classified R3 according to EN 1504, as stated in the manufacturer's technical data sheet.

As per the TDS: 18 kg/m² per cm of thickness.

25 kg

You can download the official Planitop 400 ME technical data sheet as a PDF directly from this page, revision 5-2014, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.

Planitop 400 ME in the UAE

Tell us the area. We will quote the job.

Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Planitop 400 ME you need, or describe the job and we will work it out with you.

Chat on WhatsApp