
Mapei Repair MortarNo. 48 / 53
Planitop Fast 330 Technical Data Sheet (TDS)
Repair Mortar to EN 1504-2 CLASSIFIED AS MC IR, GP CS IV_REVISED (1).
Planitop Fast 330 is a quick setting, fibre reinforced levelling mortar for internal and external floors and walls, applied from 3 to 30 mm to take out irregularities before something else goes on top. Speed is the point: substrates are ready for ceramic and stone after 4 hours at 20 degrees and for liquid or flexible cementitious waterproofing after 24 hours.
- Levelling pool shells before Mapelastic waterproofing systems
- Smoothing screeds before laying ceramic and stone
- Levelling old ceramic and stone floors
- Repairing or forming slopes on terraces and balconies
- Internal and external floors and walls from 3 to 30 mm
Build a list across products and send it once, or ask about Planitop Fast 330 on WhatsApp now.
- Class
- EN 1504-2 CLASSIFIED AS MC IR, GP CS IV_REVISED (1)
- Consumption
- 1.55 kg/m² per mm
- Pack we stock
- 25 kg
- Colour
- grey
Mapei document 02608
About Planitop Fast 330
It levels reinforced concrete in swimming pools ahead of the Mapelastic systems, smooths screeds and old ceramic and stone floors, and forms or repairs slopes on terraces and balconies. Consumption is about 1.55 kg per square metre per millimetre, so 15.5 kg per square metre at 10 mm, supplied in 25 kg vacuum packed bags that give better protection against accidental rain in storage. Note that this is a levelling mortar and not a structural repair product.
Documentation
Related documentation
Technical data sheet
2.3 MB · PDF
Planitop Fast 330 as the manufacturer publishes it, unaltered.
DownloadSafety data sheet
Needed for a method statement or a site file. Ask and we will send it.
RequestSubmittal pack
Data sheet, safety data sheet and our authorisation letter together, for a consultant submittal.
Request
Coverage calculator
How much you need.
The sheet states 3 to 30 mm.
As published in the data sheet
1,550kg
- 1.55 kg/m2 per mm
- 20 mm thick
- over 50 m2
Order 62 packs of 25 kg bag
Taken from the Planitop Fast 330 data sheet: CONSUMPTION: approx. 1.55 kg/m2 per mm of thickness, 1 cm thick gives 15.5 kg/m2. No site allowance is added unless you turn one on. Thickness of layer, from 3 to 30 mm.
Application
Where it is used.
- 01Levelling pool shells before Mapelastic waterproofing systems
- 02Smoothing screeds before laying ceramic and stone
- 03Levelling old ceramic and stone floors
- 04Repairing or forming slopes on terraces and balconies
- 05Internal and external floors and walls from 3 to 30 mm
Specification
Technical data.
- EN 1504-2 CLASSIFIED AS MC IR, GP CS IV_REVISED (1)
- EN 1504
- EMICODE EC1 - very low emission
| Classification | EN 1504-2, MC IR, GP CS IV |
|---|---|
| Coverage | Approx. 1.55 kg/m² per mm of thickness (1 cm thick: 15.5 kg/m²). |
| Pack size | 25 kg |
| Colours | grey |
| Consistency | powder |
| Storage and shelf life | Planitop Fast 330 may be stored up to 12 months in its original packaging. The 25 kg vacuum-packed polyethylene bags offer better protection from accidental rain. |
| EMICODE | EC1 - very low emission |
| Density | 1850 kg/m³ |
Typical values as Mapei prints them in the data sheet for Planitop Fast 330. Manufacturers revise their sheets, so ask us for the current edition before you specify.
On site
Packs, mixing and storage.
We stock
25 kg. Other pack sizes can usually be brought in on a project order, so tell us the quantity before you assume what is available.
Storage
Planitop Fast 330 may be stored up to 12 months in its original packaging. The 25 kg vacuum-packed polyethylene bags offer better protection from accidental rain. in unopened packaging, stored dry and out of direct sun. Heat and humidity both shorten it.
For quantity surveyors
BOQ clause.
Supply and apply Planitop Fast 330, a repair mortar manufactured by Mapei, classified EN 1504-2 CLASSIFIED AS MC IR, GP CS IV_REVISED (1). Allow 1.55 kg/m2 per mm, as published by the manufacturer. Supplied in 25 kg. Prepare the substrate and apply strictly in accordance with the manufacturer's current technical data sheet. Rates are for estimating and exclude wastage.
| Product | Planitop Fast 330 |
|---|---|
| Manufacturer | Mapei |
| Type | Repair Mortar |
| Classification | EN 1504-2 CLASSIFIED AS MC IR, GP CS IV_REVISED (1) |
| Consumption | 1.55 kg/m2 per mm |
| Pack size | 25 kg |
| Unit of measurement | m2 |
Frequently Asked Questions
Planitop Fast 330 is classified EN 1504-2 CLASSIFIED AS MC IR, GP CS IV_REVISED (1) according to EN 1504, as stated in the manufacturer's technical data sheet.
As per the TDS: Approx. 1.55 kg/m² per mm of thickness (1 cm thick: 15.5 kg/m²).
25 kg
You can download the official Planitop Fast 330 technical data sheet as a PDF directly from this page, sourced from the manufacturer. For prices and stock in the UAE, contact Lapiz Blue on WhatsApp.
Related Products

Adesilex PG2
View TDS and specifications

Adesilex PG2 TG
View TDS and specifications

Adesilex PG4
CE EN 1504-4
View TDS and specifications

Dynamon MR 2100
ASTM C494, EN 934-2
View TDS and specifications

Dynamon MR 3000
ASTM C494, EN 934-2
View TDS and specifications

Dynamon SR 1200
ASTM C494, EN 934-2
View TDS and specifications
All Concrete Additives and Repair SystemsEvery Mapei product and the distributor page
On the van
Tools for this job.

Hilti
TE 500-22 Cordless Chipping Hammer
Breaking back to sound concrete and squaring the edges of the patch before anything is mixed.
View the range
Keiser
Mixing Applications
Repair mortars are mixed to a stated consistency, not to whatever looks right in the bucket.
View the range
Peygran
Cement Tools
Trowels and finishing floats to work the mortar into the prepared edges and bring it flush with the surround.
View the range
Planitop Fast 330 in the UAE
Tell us the area. We will quote the job.
Lapiz Blue supplies Mapei from Dubai, Abu Dhabi and Sharjah. Send the quantity of Planitop Fast 330 you need, or describe the job and we will work it out with you.